Cypress PSoC 6 MCU高性能超低功耗IoT应用方案

Cypress公司的PSoC 6 MCU是高性能超低功耗和安全MCU平台,组合了高性能微控制器和低功耗闪存技术,数字可编逻辑,高性能模数转换和标准通信与定时外设.PSoC 6器件包括广泛支持编程,测试,调试以及跟踪硬件和固件.PSoC 6器件的32位双核CPU子系统,具有单周期乘法器的150MHz Arm® Cortex®-M4F CPU(浮点和存储器保护单元),具有单周期乘法器和MPU的100MHz Cortex-M0+ CPU,用户可选择的核逻辑工作在1.1V或0.9V,器件有用于两个CPU核的8KB指令缓存,Cortex-M4核的工作电流为40 μA/MHz, Cortex-M0+核的工作电流为20 μA/MHz,器件有两个DMA控制器,每个有16个通路.PSoC 6集成了1MB应用闪存,32KB仿真EEPROM区域和32KB监视闪存,288KB SRAM具有电源和数据保留控制功能,低功耗1.7V-3.6V工作,有六个功耗模式,深度睡眠模式电流7 μA.主要用在物联网应用.本文介绍了PSoC® 6 MCU主要特性,框图,时钟图,电源连接图和PSoC 6 Wi-Fi BT原型开发板CY8CPROTO-062-4343W主要特性,框图,电路图和PCB设计图.
PSoC® 6 MCU is a high-performance, ultra-low-power and secure MCU platform, purpose-built for IoT applications. The PSoC 61product family, based on the PSoC 6 MCU platform, is a combination of a high-performance microcontroller with low-power flashtechnology, digital programmable logic, high-performance analog-to-digital and standard communication and timing peripherals.
The PSoC 6 devices include extensive support for programming, testing, debugging, and tracing both hardware and firmware.Complete debug-on-chip functionality enables full device debugging in the final system using the standard production device. It doesnot require special interfaces, debugging pods, simulators, or emulators. Only the standard programming connections are requiredto fully support debug.
The ModusToolbox Integrated Development Environment (IDE) provides fully integrated programming and debug support for thesedevices. The SWJ (SWD and JTAG) interface is fully compatible with industry-standard third party probes. There are three debugaccess ports, one each for CM4 and CM0+, and a system port. These debug access ports can be enabled or disabled independentlybased on the...